Hobbyfuser Features
Quartz tube "infra-red" heating system.
Stainless Steel chamber and base.
Lid spring lift assist.
Recessed floor with retaining walls..
KCR32C digital Control with 32 pre-set and adjustable programs.
KCR32C internal over-fire safety circuit and dedicated safety relay to protect the kiln from over temperature faults and damage.
Optional KCR32CWIFI internet access to kiln status and programs, real time monitoring from any device, anywhere with internet access via the Kilncare GATEway.
Don't be fooled by the name, the Hobbyfuser GEN4 is a serious glass kiln. The kiln is built for a long life span and we have no worries at all in issuing the kiln with a 4 year guarantee on all parts INCLUDING the elements.
When the kiln was in development it was run at 950°C and held for 1 hour over 40 times. At the end of the trial we stripped the kiln down and even we were amazed at the lack of deterioration we came across.
While we are on the subject of performance, The Hobbyfuser GEN3 does not suffer with the usual lazy, slow behavour associated with other large plug in kilns. Due to its high performance, infra-red quartz elements and well designed insulation, the Hobbyfuser GEN4 will make the all important 700c to 800c dash at a rate of nearly 450 degrees per hour even with the optional shelf installed. That is only 11 minutes and if a shelf is not used then that same dash can be made in an incredible 9 minutes. This makes the Hobbyfuser GEN4 almost infinately controlable ensuring the glass doesn't get "over-worked" by it being in the heat longer than is required.
Fast react thermocouple.
Non ceramic fibre lid section
Light weight refractory brick base.
Astonishing performance.
Fast cooling.
Vent hole in roof..
Optional stand and inner shelf kit
FOUR years guarantee on ALL parts - INCLUDING the elements.
Designed and built by Kilncare in the United Kingdom.
Cart
